Moisture Proof

Concrete Moisture Barrier | Moisture Proof | 100% Pure Colloidal Silica 

Moisture Proof is a liquid applied concrete moisture barrier and concrete densifier for new or old concrete. It does NOT require any mixing and is applied simply by pouring & spreading or spraying with a pump up spray pack. A soft broom is required for an even application and to spread out any puddled areas. Moisture Proof deeply penetrates the concrete to form a non-destructive, 100% colloidal gel. The colloidal gel provides a permanent barrier that withstands hydro static pressure.

It is a cost effective Concrete Moisture Barrier that replaces messy & time consuming two part epoxy systems. It has an extremely long shelf life and allows early access to the substrate with minimum site disruption. It is foot traffic-able one hour after application and floor coverings or prep work can be installed 24 hours after application in majority of cases. User friendly, non-toxic and non-flammable, has zero VOC and is environmentally safe. Moisture Proof is Australian Made and conforms to the moisture suppressant requirements as per AS1884-2012.

Moisture Proof also has the following benefits:

• It is a permanent concrete moisture barrier.
• It can be applied to almost any concrete product containing 10% Portland cement.
• Easy to apply and can be broomed on to existing concrete or at time of pour.
• The concrete substrate is foot traffic-able after just 1 hour.
• Install floor coverings within 24 hours of application to existing concrete.
• Can be used at time of pour to also assist in curing.
• It is more than 21% cheaper than other moisture barrier methods.

*Some basic facts about colloidal silica densifier.